undefined
+
  • undefined

P3000 high pressure infusion pump

P3000 high pressure infusion pump

Key words:

Classification:

Products

Product Consulting:

  • Product Description
  • Technical parameters
  • More introduction
    • Commodity name: P3000 high pressure infusion pump
    • Commodity ID: 1091282515466539008

    P3000A high-pressure infusion pump is a high-efficiency and precision infusion pump system controlled by single-chip microcomputer based on CPLD technology. It is based on all-digital frequency generation system, advanced motor drive system and friendly man-machine display interface makes the operation and control of the equipment very convenient. Advanced pump head and one-way valve design ideas, the integration of advanced experience in the world today, so that users in a variety of conditions of use can guarantee the accuracy and repeatability of the infusion index. The flow error limit and the flow repeatability deviation limit have been greatly improved.

      P3000 HPLC pump is a new generation of pumps that use CPLD technology and be controlled by microprocessor. It presents us high precision and accuracy based on fully digital frequency generation system, advanced motor driver system and kindly user‘s interface. The design of the pump shares experiences from the most advanced pumps in the world. Our independent concept is that we can give longer guarantee to customers for trouble free. The flow rate calibration can be processed at anytime by the firmware that ensures the user to obtain better analysis reproducibility and higher measurement accuracy. P3000 HPLC pumps support HPG, customers can use the HPG mode by introducing additional P3000 pump up to quaternary.

  • Ordering information:

    Serial Number
    Description
    Quantity
    1
    P3000 high pressure infusion pump 10ml stainless steel pump head
    1
    2
    P3000 high pressure infusion pump 10ml PEEK pump head
    1
    3
    P3000 high pressure infusion pump 50ml stainless steel pump head
    1
    4
    P3000 High Pressure Infusion Pump 50ml PEEK Pump Head
    1

     

    Technical parameters:

    Infusion mode
    Double plunger reciprocating pump, one for the main suction plunger, one for the auxiliary plunger
    Pump head
    Analytical 10mlStainless Steel/PEEK pump head
    Semi-preparative 50mlStainless Steel/PEEK pump head
    Maximum working pressure
    Analytical 42Mpa (stainless steel pump head)
    30Mpa(PEEK pump head)
    Semi-prepared 30Mpa (stainless steel pump head)
    20Mpa(PEEK pump head)
    Flow range
    Analytical 0.001-9.999 ml/min
    Semi-preparative 0.01-49.99 ml/min
    Flow rate accuracy
    ±0.5%(1ml/min)
    flow repeatability
    RSD≤0.1%(1ml/min)
    Display
    320X240 dot matrix large-screen LCD display, adjustable blue backlight
    System Protection
    The maximum and minimum pressure can be adjusted, the pump will automatically stop 2min higher than the maximum pressure or lower than the minimum pressure, and the data will be automatically stored.
    System Connections
    1/16 "pipe connection
    Control
    Stand-alone mode All operating parameters are set via the buttons on the front panel. When working in high-pressure gradient mode, one of the pumps is the main pump, and other high-pressure infusion pumps of the same model are controlled, and the displayed gradient mode is verified by the gradient curve on the screen.
    Serial port mode through the innovation of constant chromatography software (such as CXTH3000, Clarity, etc.) control
    Communication
    Serial Port Mode RS-232
    Power supply
    220V±10%,50Hz,400W
    Dimensions and weight
    410 X270X180mm (length x width x height),14Kg

     

    Ordering Details:

    No.
    Description
    Quantity
    1
    P3000 HPLC pump with 10ml pump head (stainless steel)
    1
    2
    P3000 HPLC pump with 10ml pump head PEEK
    1
    3
    P3000 HPLC pump with 50ml pump head (stainless steel)
    1
    4
    P300 HPLC pump with 50ml pump head PEEK
    1

     

    SPECIFICATION

    Hydraulic system
    Dual piston in series pump, main & auxiliary
    Pump head
    10ml stainless steel /PEEK analytical
    50 ml stainless steel /PEEK semi-preparative
    Maximum working pressure
    10ml pump head 42Mpa for stainless steel /30Mpa for PEEK
    50ml pump head 30Mpa for stainless steel /20Mpa for PEEK
    Flow Range
    10ml pump head 0.001-9.999ml/min
    50ml pump head 0.001-49.99ml/min
    Flow rate accuracy
    ±0.5% measurement at 1ml/min
    Flow rate precision
    RSD≤0.1% measurement and 1ml/min.
    Display
    320 X 240 blue background color
    Protection
    Adjustive Pmax & Pmin, the pump stop automatically when the pressure higher than Pmax or lower than Pmin for 2 minutes, meanwhile the data will be automatically saved
    System connection
    1/16”capillaries
    Control
    Stand-alone mode by front keypad
    HPG Mode: one pump work as master, others work as slave
    CXTH control software(e.g. CXTH3000,Clarity etc. )
    Communications
    RS-232
    Power supply
    AC220V±10%,50Hz,400W
    Dimensions and weight
    410x270x180mm(LX W x H) 14kg

     

Product inquiry

Note: Please leave your email and our professionals will contact you as soon as possible!