undefined
+
  • undefined

150mm DAC

150mm DAC

Key words:

Classification:

150mm DAC system

Product Consulting:

  • Product Description
  • Technical parameters
  • More introduction
    • Commodity name: 150mm DAC
    • Commodity ID: 1091282557623488512

    Product Introduction:

    Equipped with dynamic axial compression column150mmPilot scale-up system, usingH-TREEPatented distribution design, better separation effect. The preparation column and the column loading system adopt the integrated design, and the column loading process is very simple,10μmThe packing can achieve almost the same high column efficiency as the analysis column, can be used online after the preparation of the column is installed without disassembly, and the axial dynamic pressure is always maintained inside the column bed, which can maintain the stability of the column bed and the column efficiency for a long time, and the single sample loading amount can be more achieved.10gAbout, this product is very suitable for annual production50kgCustomers of the following pure products.

     

    Product Features:

    1)  It is convenient to install the column, and the operator can install the column by himself.

    2)  The column performance is maintained for a long time and the column has a long service life.

    3)  AdoptH-TREEPatented distribution design, better separation effect

    4)  The whole system is easy to move and can adapt to the experimental work in different places.

    5)  The dynamic axial compression column is customized according to the user's needs.

    6)  The injection mode can be selected by a separate injection pump or injection valve.

    7)  The maximum and minimum pressure can be adjusted, the pump will stop immediately when the maximum pressure is higher than the maximum pressure, and the pump will be delayed when the minimum pressure is lower than the minimum pressure.2minAutomatic pump stop.

    8)  Automatic or manual collection devices can be configured according to user needs.

     

  • Product Parameters:

    Column

    Column tube inner diameter:

    150mm

    Column tube length:

    650mm(Standard)

    Column tube material:

    316LStainless Steel

    Inner wall finish:

    Ra≤ 0.4μm

    Piston material:

    316LStainless Steel

    Sieve plate material:

    316LStainless steel, aperture:3-5μm

    Maximum withstand voltage:

    10MPa

    Air pressure demand:

    ≥ 0.8MPa

    Gas demand:

    ≥ 3m3

     

    Pump

    Infusion mode:

    double plunger reciprocating motion

    Pump head:

    1000mLStainless steel pump head

    Maximum working pressure:

    10MPa

    Flow range:

    (0.0011000)mL/min

    Flow rate accuracy:

    ±1%

    Flow repeatability:

    RSD≤ 1.0%

    Working mode:

    isocratic or gradient

     

    Detector

    Wavelength range:

    (190800) NM

    Light source:

    deuterium lamp(Standard configuration);Tungsten lamp(Replaceable)

    Wavelength accuracy:

    ±1nm

    Wavelength Repeatability:

    0.2nm

    Static Baseline Noise:

    0.5×10-5AU

    Static Baseline Drift:

    1.5×10-4I/O

    Circulation Pool:

    1000mlFlow-through cell (standard)

     

     

  • Application areas:

    1)  drug purification:Synthetic drugs, fermented drugs, biological pharmaceuticals, etc.

    2)  purification of natural products

    3)  purification of fine chemical intermediates

     

    Commonly used consumables:

    1)  High pressure sealing ring(20)X225873

    2)  Low pressure sealing ring(20,X219206)

    3)  1000mlPump plunger(Finished products)

    4)  PREPARATION PUMP CHECK VALVE

    5)  UV3000detector deuterium lamp

    6)  150DACSealing ring of sieve plate at bottom of column

    7)  150DACPiston lower seal ring

    8)  P140Axial sealing ring

    9)  150DACSealing ring of piston sieve plate

    10) FV158.6X2.5PTFE-coated seal ring

    11) FV120X2.5PTFE-coated seal ring

Product inquiry

Note: Please leave your email and our professionals will contact you as soon as possible!